11 Measures to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair
You may be surprised to see just the way to spray on car paint actually can be easy. That doesn't mean that you can simply grab a tin of paint and go at it. There are some principles you have to understand. Both in the preparation and application.
Prepare by assembling all your items that you are going to need. For other areas cover well with paper and masking tape.
You may have to analyze the car carefully. These will need to be sanded with 300 grit sand paper. Additionally, it allows the spray auto paint to stick better. Ensure all of the dust dirt and debris are taken from the vehicle once you've finished sanding. It is critical the automobile be totally clean.
This will make sure you get an overall even layer of your coloured paint plus helps the paint to adhere well. When you spray on the primer, be sure you apply light layers and allow for drying in between. The best way to spray auto paint takes a little getting used to.
Now you are pretty well to the point at which you're around ready to spray on the colour. Before you begin with the automobile either way, make a few practice strokes on an object. Start the passes with the paint without reluctance, after you happen to be ready. If you hold the spray can or gun in one place, you'll get coverage that is uneven and perhaps the paint will run. If it happens you've got a major repair job on your had. You'll most probably have instructions as to the best way to spray car paint using the spray or gear cans.
It is up to you whether you want to wet sand between coats of primer and color paints. You might want to study this option on the internet, or check with someone that is comfortable with how to spray auto paint
Once you're totally satisfied with the color, you're down to the finishing touches. You will now Alloy Wheel Repair Enfield need to apply several coatings that are clear. This can give the shine and finished appearance to the auto in addition to protect the finish. It will be up to you personally although likely two layers will be sufficient. Make absolutely sure it is dry in between coats.
Once again, you have the alternative of wet sanding if you favor. Again, I would recommend you ask the guidance of individuals that are comfortable with the way to paint an automobile. You need with the following grits in this arrangement if you decide to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that may not be overly light in the clear coat application.
You should buff the surface. To try this just use a moderate cut polish. Once this has been done by you, you should have a glassy appearance that is perfect to the finish.
As a final touch, you might want to apply a couple of coats of wax.